 |
MDOPE (Machine-Direction Oriented Polyethylene) is a type of oriented polyethylene film produced through a machine-direction (longitudinal) stretching process.
This film has high transparency, excellent mechanical strength, good barrier properties, and heat-sealing capabilities. It is commonly used in packaging for food, medicine, cosmetics, and other products. It meets the environmental packaging demand for recyclability using a single material.
Most flexible packaging today is made from multiple material layers for barrier and freshness purposes. After use, these complex structures are difficult to separate and recycle, often ending up in landfills or incinerators.
With innovative MDO-PE technology, single-material polyethylene (PE) packaging now achieves the high performance once only possible with complex composites. This is not just a material upgrade—it’s a fundamental shift in packaging logic.
The MDOPE film from FSPG company is made of high-performance single polyethylene material, combining excellent barrier properties with recyclability. Let every consumption contribute to reducing the burden on the Earth.
1) Excellent barrier properties, superior mechanical and printing performance, good thermal stability, and low shrinkage rate.
2) It exhibits excellent properties such as high tensile strength, stiffness, and easy linear tearing in the MD direction.
3) Excellent aroma preservation performance, resistant to boiling in water at 90C for 30 minutes, suitable for printing layers on packaging for liquids,coffee,and similar products.
1) It's uesd for printing layer of mono-material packaging.
2) It's available for hot filling or pasteurization packaging.
3) It's suitable for dry goods and liquid packaging with barrier requirement.
4) It can be used for packaging under room temperature or freezing condition.
5) Common structural for packaging applications:
MDOPE/PE/CPE
MDOPE/BOPE/CPE
Type | Thickness | Shrinkage | WVTR | OTR |
MDOPE-N | 25μm | 2.5% | 5.0 g/(m2·24h) | / |
MDOPE-B | 25μm | 2.5% | 5.0 g/(m2·24h) | 5.0 cc/(m2·24h·0.1Mpa) |
MDOPE-OB | 25μm | 2.5% | 5.0 g/(m2·24h) | 1.0 cc/(m2·24h·0.1Mpa) |
Upgrade your packaging solution now and experience the performance revolution of MDO-PE!
Contact us for free samples and technical consultation.
MDOPE (Machine-Direction Oriented Polyethylene) is a type of oriented polyethylene film produced through a machine-direction (longitudinal) stretching process.
This film has high transparency, excellent mechanical strength, good barrier properties, and heat-sealing capabilities. It is commonly used in packaging for food, medicine, cosmetics, and other products. It meets the environmental packaging demand for recyclability using a single material.
Most flexible packaging today is made from multiple material layers for barrier and freshness purposes. After use, these complex structures are difficult to separate and recycle, often ending up in landfills or incinerators.
With innovative MDO-PE technology, single-material polyethylene (PE) packaging now achieves the high performance once only possible with complex composites. This is not just a material upgrade—it’s a fundamental shift in packaging logic.
The MDOPE film from FSPG company is made of high-performance single polyethylene material, combining excellent barrier properties with recyclability. Let every consumption contribute to reducing the burden on the Earth.
1) Excellent barrier properties, superior mechanical and printing performance, good thermal stability, and low shrinkage rate.
2) It exhibits excellent properties such as high tensile strength, stiffness, and easy linear tearing in the MD direction.
3) Excellent aroma preservation performance, resistant to boiling in water at 90C for 30 minutes, suitable for printing layers on packaging for liquids,coffee,and similar products.
1) It's uesd for printing layer of mono-material packaging.
2) It's available for hot filling or pasteurization packaging.
3) It's suitable for dry goods and liquid packaging with barrier requirement.
4) It can be used for packaging under room temperature or freezing condition.
5) Common structural for packaging applications:
MDOPE/PE/CPE
MDOPE/BOPE/CPE
Type | Thickness | Shrinkage | WVTR | OTR |
MDOPE-N | 25μm | 2.5% | 5.0 g/(m2·24h) | / |
MDOPE-B | 25μm | 2.5% | 5.0 g/(m2·24h) | 5.0 cc/(m2·24h·0.1Mpa) |
MDOPE-OB | 25μm | 2.5% | 5.0 g/(m2·24h) | 1.0 cc/(m2·24h·0.1Mpa) |
Upgrade your packaging solution now and experience the performance revolution of MDO-PE!
Contact us for free samples and technical consultation.